hn.academy |
Online courses recommended by Hacker News users. [about] |
1. Quantum Mechanics and Quantum Computation (on edX, from UC Berkeley: https://www.edx.org/course/quantum-mechanics-quantum-computa... ), taught by Umesh Vazirani. Intro to quantum computing that made clear key ideas in quantum mechanics, almost in passing. The first of over 70 MOOCs I completed, not available at the moment.2. Astrophysics (on edX from Australian National University, 4-part series: https://www.edx.org/xseries/astrophysics ) taught by Brian Schmidt and Paul Francis. Delightful. Plenty of math but mostly at undergrad level. A grand tour of current topics.
3. First Nights - Handel's Messiah and Baroque Oratorio (on edX from Harvard: https://www.edx.org/course/first-nights-messiah-harvardx-mus... ) taught by Thomas Forrest Kelly. Historical perspective and structure of the music. I was hooked from the first lecture. One of a series of 5 outstanding courses in the "First Nights" series, this is my favorite.
So many great MOOCs, so little time.
I learned from a coursera course some number of years ago. It was actually quite good. (This should also give you the correct impression that I am not an expert here and you should take my suggestions with a grain of salt.) I think it was this one: https://www.edx.org/course/quantum-mechanics-quantum-computa... (Taught by Aaronson's advisor.)
I'm not sure if materials on edx are still available but Quantum Mechanics and Quantum Computing [1] course there was mindblowing. I was surprised how the ideas and maths were simple enough.[1]: https://www.edx.org/course/quantum-mechanics-quantum-computa...
For those interested https://www.edx.org/course/quantum-mechanics-quantum-computa...
I highly recommend this course on Edx: https://www.edx.org/course/quantum-mechanics-quantum-computa...
If you want to know more about Quantum Computation, there is an edX course ( https://www.edx.org/course/quantum-mechanics-quantum-computa... ). It goes over the Shor algorithm and the quantum Fourier Transform that leads up to the Shor algorithm.
jndsn402I have a math background, no physics. Whenever I try educating myself about this stuff I get hung up on the contradictions and can't/don't want to just take certain concepts as given in order to understand more advanced concepts.For example (from the pdf of the intro to this course, https://courses.edx.org/c4x/BerkeleyX/CS-191x/asset/chap1.pd...):
"Logically, we can ask which slit the photon went through, and try to measure it. Thus, we might construct a double slit experiment where we put a photodetector at each slit, so that each time a photon comes through the experiment we see which slit it went through and where it hits on the screen. But when such an experiment is performed, the interference pattern gets completely washed out! The very fact that we know which slit the photon goes through makes the interference pattern go away."
I read that and say, really? The fact that we know about it? How does the photon know that we know about it? I always feel like this is just a layman's way of describing what happens, but there is actually a more rigorous understanding among physicists. Is that the case? Because after reading that sentence I want to stop right there and redo that experiment until we figure out what's really going on.
tzs> How does the photon know that we know about it?The next sentence after the part you quoted is the key: "This is the first example we see of how measuring a quantum system alters the system".
To measure the system in order to know which slit it went through, we had to physically interact with it, and that changes its behavior. The experiment is no longer "send photons through these double slits and then count them over there". It's "send photons through these double slits, make them interact with our measuring doohickey right behind the slits, and then count them over there".
Take a look at Feynman's coverage of this in Chapter 1 of Volume III of "The Feynman Lectures on Physics". You can find them online in a beautiful HTML version here: http://www.feynmanlectures.caltech.edu
jndsn402I will check out the Feynman lectures, thanks for the reference. But my initial reaction is, isn't the measuring thing somewhere past the slit? So how could its presence there influence which slit the photon goes through?tzsYou kind of have to give up the notion that the photon goes through a slit.A striking illustration of this is given by the setup diagrammed in this image: http://imgur.com/UlFU7oi
You have a source of photons at the bottom. It fires them them at a half-silvered mirror. When a photon hits a half-silvered mirror, it randomly either reflects or passes through. The first half-silvered mirror splits the photon beam into two beams, labeled 1 and 3. Beam 1 hits a regular mirror, which sends it down path 2 toward another half-silvered mirror. Beam 3 hits a regular mirror which sends it down path 4 to that second half-silvered mirror.
At the second half-silvered mirror, photons coming in on path 2 can either pass through and be registered at detector B, or reflect and be registered at detector A.
Photons on path 4 can reflect into detector B, or pass through into detector A.
Start out with the source at high intensity, so we have a lot of photons, and can treat the light like a wave. The distances of the paths can be adjusted so that light on path 2 that passes through to B is out of phase with light on path 4 that reflects into B, and so we get destructive interference and B detects nothing. We get constructive interference on path 5, so all the light ends up at detector A.
Now, keeping the light at high intensity, block path 4 at the point labeled "test point". Now half the light leaving the source takes path 3 and gets blocked at the test point. The other half of the light takes 1 and 2, splits at the second half-silvered mirror, and since there is no light on path 4 there to interfere, half of the light from path 2 goes to A and half to B. Net result: 1/2 the light lost at the test point, 1/4 detected at A, and 1/4 detected at B.
Now, leaving the block in place at the test point, turn the light source down so that it is emitting single photons, say a photon a second. What we will now find is that 1/2 the photons get lost (the ones that took path 3 and 4, and hit the block), 1/4 end up at A (the ones that took 1 and 2, then reflected at the half-silvered mirror), and 1/4 end up at B (the ones that took 1 and 2 and then passed through the half-silvered mirror).
So far, everything makes intuitive sense.
Now remove the block. Intuition says that we should have 1/2 the photons take 1 and 2, and 1/2 take 3 and 4. The photons, when they arrive at the second half-silvered mirror, should end up distributed equally to A and B. So we should see 1/2 the emitted photons at A and 1/2 at B.
What actually happens is that they all end up at A.
How can this be? We are somehow getting interference even though we are only sending single photons through!
This lets us do something remarkable. Suppose I have been playing with the equipment, and left it in an unknown state. You don't know if I have the block at the test point or not, and it is inconvenient to reach the test point to check.
So you send a single photon through, and it happens to register at B. You can infer that I left the block in, because if I had taken it out, there would have been interference and the photon would have come out at A.
Think about that...the photon came out at B, meaning it did not hit the block, meaning it had to have taken that 1/2/6 path...but then how did it "know" that the block was in place so that it was "allowed" to randomly take 5 or 6 (and ended up taking 6)?
If you remove the block and then send one photon, and it takes 1/2, and then has to "decide" whether to take 5 or 6, how does it know that the block is gone and so that it is required to take 5?
It just doesn't work to say that the photon takes a path, in the sense that it starts out at one place on that path, and as time goes forward it moves along the path.
If you want more information on this particular setup, Google for "quantum bomb tester" (the name comes from a hypothetical where you have a bunch of light sensitive bombs, but some of them have defective light sensors, and you want to find a way to figure that out without destroying all the working bombs, and this kind of split path setup provides a solution--letting you answer the question "would this bomb explode if I hit it with a photon?" without actually hitting it with a photon).
jndsn402Thanks for this detailed write-up. I guess I struggle more with the particle aspect than the wave aspect. Meaning, if light were exclusively a wave, then the half-silvered mirror doesn't 'randomly' either reflect or pass through, it just splits the beam in two. And all the events described above would make sense - the beam splits at each half-silvered mirror, so if the block is in place you get hits at B, and if not, you don't. (Correct?)Except that we are somehow convinced that we are sending single, indivisible photons. Why is that?
And in general - I assume these experiments have actually been done, i.e. at some point long ago someone tried this and was surprised to see that the interference happened with individual photons. Is there a write up of one of these experiments somewhere?
This course https://www.edx.org/course/uc-berkeleyx/uc-berkeleyx-cs-191x... is a really good introduction in my opinion. It starts with the qubit and works its way up to quantum fourier transform. That sounds a little scary but the course is really well done and you just need some basic understanding of matrices like how to multiply them to get started.
I highly recommend the quantum computing MOOC from UC Berkeley. I took it when it was on Coursera but now it's on edx.https://www.edx.org/course/uc-berkeleyx/uc-berkeleyx-cs-191x...